Microcement

Description

Microcement: Innovative Sustainable Architecture with Advanced Technology

A Revolution in Construction with Microcement

Concrete has always held a special place in modern architecture due to its high strength and flexibility. Microcement, combining modified polymer cement, pozzolan, nano-additives, and calibrated silica aggregates, offers an intelligent solution to the challenges of traditional concrete. This technology retains all the benefits of conventional concrete while overcoming its weight and application limitations.

Unique Technical & Practical Advantages of Microcement

1. Advanced Technical Features

✔ Optimized Composition:

• Polymer-modified Portland cement base

• Nanometric pozzolanic particles for increased density and reduced porosity

• Calibrated silica aggregates for superior abrasion resistance

✔ Outstanding Mechanical Properties:

• Compressive strength: ≥25 MPa (after 28 days)

• Tensile strength: ≥5 MPa

• Surface water absorption: ≤0.5% (per EN 13888)

• Freeze-thaw resistance: ≥50 cycles with no quality degradation

2. Practical Benefits

✅ Seamless Application System:

• Applicable in 1–3 mm layers per coat

• Suitable for horizontal, vertical, and ceiling surfaces

• No expansion joints required for up to 10 linear meters

✅ Cost Efficiency:

• Eliminates formwork and complex substructure costs

• 40% lighter than traditional concrete

• Service life ≥15 years with proper maintenance

Professional Application Guidelines

1. Surface Preparation

◼ Surfaces must be free of dust, grease, and loose particles
◼ Absorbent surfaces require special primer (consumption: ~0.2 kg/m²)
◼ Smooth surfaces should be sandblasted or wire-brushed

2. Environmental Conditions

🌡 Temperature: 5–35°C
💧 Humidity: Max. 80%
⚠ Avoid application in:

• Rain or direct moisture

• Temperatures below 5°C within 24 hours

• Strong winds (>30 km/h)

3. Application Method

🔧 Standard Two-Layer System:

• Base layer (primer + microcement): 1–1.5 mm thickness

• Top layer (microcement + color): 1–1.5 mm thickness
  ⏳ Curing time between layers: 4–6 hours (at 20°C)

🔨 Required Tools:

• Notched steel trowel (for even distribution)

• Polymer spatula

• Finishing sponge

Specialized Applications

🏗 Modern Facades:

• Custom textures (smooth, wavy, wood-like)

• UV and weather-resistant

🏊 Aquatic Environments:

• Waterproofing for pools & spas

• Chlorine and salt-resistant

🏭 Industrial Use:

• Heavy-traffic floor coatings

• Chemical resistance (oils, solvents)

Warranty & Maintenance

🔹 5-year warranty (with proper application)
🔹 Clean with pH-neutral detergents (pH 6–8)
🔹 Spot repairs possible (no full reconstruction needed)

Technical Comparison Table

📞 Our technical experts are ready to assist you:
+98 912 080 5576